Compressor - Types of Compressor - Compressor Types        

air compressor types - air compressor -industrial air compressor There are mainly 5 sorts of compressor that are normally utilized in our industry. A compressor may be a robot that increases the pressure of a gas or air by reducing its volume. Compressors are almost like pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe. As air or gases are compressible, the compressor also reduces the quantity of an air or gas. during this article we'll see the various sorts of compressor.

 

 1. Reciprocating Compressor. (reciprocating air compressor)

 2. Rotary Compressor. (rotary screw compressor)

 3. Scroll compressor. (scroll compressor)

 4. Screw Compressor. (screw compressor)

 5. Centrifugal compressor.  (Centrifugal compressor)

 

 1)  Reciprocating Compressor 

(reciprocating air compressor)

          

         Reciprocating compressors use piston driven by a crankshaft. they will be either stationary or portable,can be single or multi-staged, and may be driven by electric motors or combustion engines. 

 2) Rotary Compressor

 (rotary screw compressor)

 These compressors aren't of reciprocating nature, therefore doesn't have any pistons and crankshaft. Instead, these compressors have screws, vanes,scrolls, and other devices which rotate and thus compress air or gas. The rotary compressor are often divided into two types. 

•        One has blades or vanes that rotate with the shaft.
•        The opposite type has the blade which remains stationary and is a component of the compressor housing assembly. 

 3)Scroll Compressor. 

(scroll compressor)

         A scroll compressor has one fixed scroll which remains stationary and another moving or orbiting scroll that rotates through the utilization of swing link. When this happens, the pockets of air or gas between the 2 scroll are slowly pushed to the middle of the 2 scrolls, causing the reduction of the quantity of the air or gas. 

 4)Screw Compressor. 

 (screw compressor)

      The screw compressor uses a pair of helical rotors, where it traps and compresses the air or gas, because the rotors revolve within the cylinder. The male rotor and therefore the female rotor are built inside the cylinder. 

 5) Centrifugal Compressor. 

(Centrifugal compressor)

       Centrifugal compressor is typically utilized in large capacity of compression system. during this compressor, the air or gas is moved during a circular motion that referred to as force . An impeller which may be a disk with radial blades spins rapidly inside this housing causing the gas to realize velocity. 

         Dear friends , Thanks for reading the article any question write within the comment box. do not forget to  share.